TMS320F28P650DK: How can the peripheral device initialization function based on SysConfig (graphical user interface) be added to an existing project?

nie chunying

Part Number: TMS320F28P650DK
Other Parts Discussed in Thread: SYSCONFIG

Tool/software:

I made the modifications and added "sysconfig" based on the content of the TI forum

Here is my configuration, but there is an error.

+1 Yan Jason 6 months ago

Perhaps F28P65 is not the name of the board. I usually leave it blank and select the correct device in the syscfg file instead.

+1 Siddharth Deshpande 6 months ago in reply to Yan Jason

Hi,

What is the Sysconfig version /CCS version that you are using?

When you open the SysConfig file, does it prompt you to select the device?

Best Regards

Siddharth

+1 Yan Jason 6 months ago in reply to Siddharth Deshpande

I'm using CCS 20 and when I open sysconfig for the first time, it prompts me to select a device.

+1 Siddharth Deshpande 6 months ago in reply to Yan Jason

Hi,

You have specified "F28P65x" in the board arguments, it should be specified as the device.

Best Regards

Siddharth

0 nie chunying 6 months ago in reply to Yan Jason

Thank you very much for your reply. I will try to debug it myself.

0 nie chunying 6 months ago in reply to Siddharth Deshpande

Do you mean that I should write F28p65DK9?I'm still not sure about it. I'll be checking to see.

0 nie chunying 6 months ago in reply to Siddharth Deshpande

I wrote it according to the first diagram (1-6).

0 Siddharth Deshpande 6 months ago in reply to nie chunying

The -device argument should be "F28P65x" (--device "F28P65x") to the SysConfig

Best Regards

Siddharth

C2000 microcontrollers forum