TMS320F28379D: PieVector

? ?

Part Number: TMS320F28379D

Tool/software:

Hello Ti engineers!

Weather the EALLOW and EDIS instructions are needed, when i write the PieVectortable. I don't find information about it in 28379D TRM. If there is anything about it please provide the article.

Thanks.

5 months ago

0 Benjamin Collier 5 months ago

TI__Mastermind 36526 points

Hi,

I will need a few days to get back about this.

Best Regards,

Ben Collier

0 ? ? 5 months ago in reply to Benjamin Collier

Prodigy 25 points

Hi,

Thanks for your reply.

Best Regards,

Z N

0 Benjamin Collier 5 months ago in reply to ? ?

TI__Mastermind 36526 points

Hi,

From the TRM:

Registers in the TRM are shown in tables like the below:

All registers have the "write protection" column, but most do not have any write protections, and the column in the TRM is empty. Some registers have the EALLOW write protection described above.

Best Regards,

Ben Collier

0 ? ? 5 months ago in reply to Benjamin Collier

Prodigy 25 points

I mean, do we need the EALLOW and EDIS instructions when writing into the pievector table? Because I couldn't find any relevant explanations or the table in the TRM.

+1 Benjamin Collier 5 months ago in reply to ? ?

TI__Mastermind 36526 points

Hi,

? ? said:
I mean, do we need the EALLOW and EDIS instructions when writing into the pievector table? Because I couldn't find any relevant explanations or the table in the TRM.

I am not sure, but it is ok to use EALLOW permissions during all register initialization.

Best Regards,

Ben Collier

0 ? ? 5 months ago in reply to Benjamin Collier

Prodigy 25 points

Thanks for your reply.

Best Regards

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F28379D: PieVector