• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 83 subscribers
  • Views 325 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIEVM-VIENNARECT: Compatible with TMDSCNCD28P55X?

Kei Kuwahara
Expert 8810 points

Part Number: TIEVM-VIENNARECT
Other Parts Discussed in Thread: TMDSCNCD28P55X, C2000WARE

Tool/software:

Hello team,

Can I use TMDSCNCD28P55X for TIEVM-VIENNARECT?

If not, can you recommend me any MCU control card compatible with TIEVM-VIENNARECT, which supports TI Edge AI studio?

Best Regards,
Kei Kuwahara

  • 0
    TI__Expert 8810 points

    Hello team,

    Can anyone help me?

    Best Regards,
    Kei Kuwahara

  • +1 in reply to Kei Kuwahara
    TI__Expert 6390 points

    Kei,

    Yes, you can use TMDSCNCD28P55X.

    You can also confirm this by looking at signals and peripheral requirement in reference design schematic located in the following location

    C:\ti\c2000\C2000Ware_DigitalPower_SDK_5_04_00_00\solutions\tidm_1000\hardware\MCU011A\DesignOutputs\Schematics

    Please note that firmware is not ported to TMDSCNCD28P55X and there is no sigma-delta modulator for current sensing on this device. S/D sensed current is optional for control. You can use ILx_Fdbk analog signals from current sensor for control.

    Regards,

    Sumit