C2000 デジタル制御ライブラリ:C2000 microcontrollers forum

Kobayashi Osamu

Part Number: C2000-DIGITAL-CONTROL-LIBRARY

Tool/software:

I have a question.
Please tell me about the capacitance of the capacitor connected to the VDDIO pin of the "TMS320F28377DPTPEP".

”3.3-V digital I/O power pins. Place a minimum 0.1-μF
decoupling capacitor on each pin. The exact value of the
decoupling capacitance should be determined by your
system voltage regulation solution.”

Please tell me how to determine the capacitor capacitance.
Thank you in advance.

Best regards,

Osamu Kobayashi

over 1 year ago

0 Matt Kukucka over 1 year ago

TI__Mastermind 20380 points

Hello,

I've relayed this thread to the correct expert, please expect a reply within the next day.

Best,

Matt

0 Peter Luong over 1 year ago

TI__Mastermind 24521 points

Hi Osamu-san,

0.1 uF capacitor is sufficient for most applications, you can see this referenced in the controlCARD and LaunchPad designs for F2837x. Please refer to http://ti.com/lit/pdf/spracz9 for some additional insight. If you expect that the power planes may be quite noisy, you can increase the capacitance of the decoupling caps (for example if you have common ground with particularly noisy circuitry). Or if you notice that your power supply output is prone to instability.

Regards,

Peter

C2000™︎ microcontrollers

C2000 microcontrollers forum

C2000 デジタル制御ライブラリ:C2000 microcontrollers forum