LAUNCHXL-F28379D: Problem while debugging and flashing the firmware.

Smeet Bathani

Tool/software:

When I build and try to debug or flash the code, The CCS theia notifies that "No compatible debug core found." What may be the potential reason for not be able to flash and debug the code in CCS for the given launchpad?

6 months ago

0 Ryan Ma 6 months ago

TI__Mastermind 27736 points

Hi Smeet,

Can you provide me what example project you're using that is causing this error? Can you provide some screenshots of the steps you're taking that is causing this issue?

If importing an existing example, you should be able to debug the project, and if the device is connected, the code will auto load to CPU1 and halt at the start of main.

Best regards,

Ryan Ma

0 Smeet Bathani 6 months ago in reply to Ryan Ma

Prodigy 30 points

Hello Ryan,

Thank you for the reply,
But the issue has been solved, there was some linker script issue.

Warm Regards,

Smeet Brijesh Bathani

0 Ryan Ma 6 months ago in reply to Smeet Bathani

TI__Mastermind 27736 points

Hi Smeet,

Can you mark this thread as resolved and we can close this ticket.

Best regards,

Ryan Ma

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28379D: Problem while debugging and flashing the firmware.