Other Parts Discussed in Thread: TIDM-02010
Tool/software:
Dear TI Support Team,
We are currently working with the TIDM-02010_DMPFC solution from the C2000 MotorControl SDK on our custom board. Before implementing advanced control, we would like to know if it is possible to operate the motor in open-loop V/F (Volts per Hertz) mode using this library.
Could you please confirm whether V/F mode is supported in the existing TIDM-02010_DMPFC framework? If not directly supported, kindly guide us on how we might adapt the library to achieve V/F control as an initial step before moving on to sensorless FOC.
Your guidance will help us plan the control strategy for our application.
Best regards,
Navneeth Kumar
