• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 290 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-1000: Design information and difference in control boards.

Nico Schneider
Prodigy 420 points

Part Number: TIDM-1000
Other Parts Discussed in Thread: TIEVM-VIENNARECT, C2000WARE

Tool/software:

Hello,

i need more information for designing my prototype and working with the TIEVM-VIENNARECT

Can you please support me with the following additional inforamtion ?

-              Formulas or methods for calculating losses/currents/voltages in the power semiconductors(MOSFET, Diode),

-              Guidelines for selecting and dimensioning the power devices,

-              Any application notes or design tips not included in the standard documentation.

-              Hardware Simulation

-              What is the difference between the control-boards?

Best regards,

Nico

  • 0
    TI__Mastermind 20380 points

    Hello Nico,

    The assigned expert is out-of-office today, please expect a response in the next 1-2 days.

    Best,

    Matt

  • 0
    TI__Expert 6070 points

    1. All the design related calculations are provided in C2000Ware DPSDK at following location. C:\ti\c2000\C2000Ware_DigitalPower_SDK_5_04_00_00\solutions\tidm_1000\hardware

    2. Power devices related sizing is shown in user guide in the section "4.Hardware Design Theory"

    https://www.ti.com/lit/ug/tiducj0g/tiducj0g.pdf

    3. Technical documentation is on this web page https://www.ti.com/tool/TIDM-1000 and remaining non-Ti reference is in User guide "10.Related Documentation"

    Regards,

    4. We do not have this simulation model for Vienna Rectifier available to share.

    5. Control boards are just different microcontrollers with different end equipment requirements. Currently, this design supports three F2837x, F2838x, F28004x, etc source code located in DPSDK location shown above.

    Regards,

    Sumit