LAUNCHXL-F28069M: LAUNCHXL-F28069M

Ann Elizabeth Babu

Part Number: LAUNCHXL-F28069M
Other Parts Discussed in Thread: LAUNCHXL-F28379D

Tool/software:

Lauchpad F28069 is not being detected by our system. So we installed FT_PROG tool for programming the debugger. but we need EEPROM.xml template for programming. Kindly help us with this.

4 months ago

0 Ki 4 months ago

TI__Guru**** 476191 points

There are some template in this XDS100 page:

https://dev.ti.com/tirex/explore/node?node=A__AEFfTlaHQHUWL-seh4M4tA__xdsdebugprobes__FUz-xrs__LATEST

However, I don't see an entry for LAUNCHXL-F28069M. I'm not sure if you can use one of the other available ones as an alternate.

I'll bring this thread to the attention of the device experts for further suggestions.

0 Peter Luong 4 months ago in reply to Ki

TI__Mastermind 20601 points

Hi Ann,

The debugger on LAUNCHXL-F28069M should be similar to the LAUNCHXL-F28379D, they both use an FTDI chip for the debugger. You can try to use the files provided by Ki for the F28379D

Regards,

Peter

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28069M: LAUNCHXL-F28069M