• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 85 subscribers
  • Views 245 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28379D: Regarding the C-GANG programmer's C2000 support schedule

Mars G
Intellectual 400 points

Part Number: TMS320F28379D
Other Parts Discussed in Thread: C-GANG

Hi Support Team,

We would like to program TMS320F28379D using C-GANG, but the GUI tool (C2000-C-GANG-SW) downloaded from the TI website currently only supports the F28P55x for the C2000.

We downloaded the latest GUI tool(GangPro-X Ver3.01) from Elprotronic's website, and while it now supports programming the F28379D, this tool is for C-GANG-X and unfortunately cannot be used with the C-GANG sold by TI.

When will C2000-C-GANG-SW support the F28379D?

Please tell us about the update schedule.

Best Regards,

  • 0
    TI__Mastermind 20380 points

    Hello,

    Apologies, I am out of the office until Thursday (4/2). Please expect a reply then. 

    Best,
    Matt

  • +1 in reply to Matt Kukucka
    TI__Mastermind 27935 points

    We would like to program TMS320F28379D using C-GANG, but the GUI tool (C2000-C-GANG-SW) downloaded from the TI website currently only supports the F28P55x for the C2000.

    Yes, C-GANG support (with the C2000-C-GANG-SW) is currently limited. Elprotronic will add support for older MCUs, but this will happen over a period of time.

    If you need GANG programming support on the F28379D, the legacy C2000-GANG programmer (and associated SW) would be the best choice at present.

    Thanks,

    Sira