F29H85X-TIFS-SDK: [Lifecycle]TI Cybershield Toolkit

ZW luan

Part Number: F29H85X-TIFS-SDK

Hello,TI

I want to use the TI Cybershield Toolkit to advance Lifecycle to HS-SE state.
When executing "Provision" and clicking "- Provision Keys (JTAG)", the following error appears. What is this error? How to solve it?Please.

3 months ago

0 ZW luan 3 months ago

Prodigy 30 points

The chip version I am using is REV-C

0 Matt Kukucka 3 months ago in reply to ZW luan

TI__Mastermind 20380 points

Hello,

I've assigned this thread to the relevant expert, please expect a reply shortly.

Best,
Matt

0 Aditya Singal 3 months ago

TI__Intellectual 2400 points

Hi Iuan,

I see that you are using a Rev-C sample and are trying to convert the device from HS-FS to HS-KP.
CST Secure Addons do not include the OTP KW Binary for Rev-B and Rev-C devices at the moment.
I would request you to download the latest OTP KW Package from ti.com and use the SR_20 binary in it for the same operation.

The path of the same is "C:\ti\otp_keywriter_f29h85x_SR_20_26_00_00\sbl_keywriter\keywr_bin\f29h85x\SR_20\otp_kw_f29h85x_hs_fs.hsmimage.bin"

This is also mentioned as a note in the CST documentation.

I hope this helps.

Thanks and Regards,
Aditya Singal

0 ZW luan 3 months ago in reply to Aditya Singal

Prodigy 30 points

Hello,TI：

When I execute the following command using Otpkeywriter, uart_flash_degrammer.exe, an error occurs. Please help me confirm the cause of the problem.

-----------------------------------------------------------------------------------------------

C:\ti\f29h85x-sdk_26_00_00_00\tools\flash_programmers\uart_flash_programmer>uart_flash_programmer.exe --device f29h85x --port COM23 --kernel ram_based_uart_sbl.bin --hsmrt otp_kw_f29h85x_hs_fs.hsmimage.bin --hsmkeys final_certificate.bin -w

F29x UART Firmware Programmer

Version: 2.1.0; Packet protocol: 1.0.0

Serial Port: COM23

Downloading SBL kernel to CPU1...

Downloading ram_based_uart_sbl.bin to device...

Initiate sending 79313 bytes of data...

send 512 bytes

send 465 bytes

Data bandwidth is 86256.661 bits per second (bps)

SBL kernel successfully sent!

Configuring UART for an alternate baud rate than the ROM default of 115200...

Sending configure baud rate command packet

sendPacket success

getPacket success

Device configuration:

Command code: 0x7010

Expects incoming data: false

Expects end-of-transmission packet: true

Received packet with baud rate content...

Target reconfigure baud rate: 2304000; Device max supported rate: 12000000

Baud rate configured to 2304000, waiting to recv target message...

getPacket header ERROR, recvd 0x8d, but expecting 0x1b (PACKET_HEADER)

getPacket header ERROR, recvd 0x8f, but expecting 0x1b (PACKET_HEADER)

getPacket header ERROR, recvd 0x8d, but expecting 0x1b (PACKET_HEADER)

getPacket header ERROR, recvd 0xcd, but expecting 0x1b (PACKET_HEADER)

getPacket header ERROR, recvd 0x8f, but expecting 0x1b (PACKET_HEADER)

getPacket header ERROR, recvd 0x8d, but expecting 0x1b (PACKET_HEADER)

getPacket header ERROR, recvd 0x8f, but expecting 0x1b (PACKET_HEADER)

0 Aditya Singal 3 months ago in reply to ZW luan

TI__Intellectual 2400 points

Hi Iuan,

Can you confirm that you are using the SR20 OTP KW Binary and RAM Based SBL built in SECURE_ONLY_KP_F29H85X configuration?

Thanks and Regards,
Aditya Singal

C2000™︎ microcontrollers

C2000 microcontrollers forum

F29H85X-TIFS-SDK: [Lifecycle]TI Cybershield Toolkit