Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed the week of November 23.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28P650DK: Enable Ethernet support over alternate interface

Part Number: TMS320F28P650DK
Other Parts Discussed in Thread: C2000WARE

Hi Team,

VVDN is working on an architecure to enable enthernet for F28P65, They are aware the device does not have the Ethernet MAC and hence are looking at the possible architure to enable this over interfaces available on F28P65. They are looking at the below architcure at the moment and need your guidance in verify and suggest the best possible architecure to enable this

Screenshot 2026-08-19 222027.png

Kindly help with feedback on this

Regards,
Rupesh

  • Hi Rupesh,

    Thanks for the quick offline discussion.

    As we discussed, please refer the PDF in F28P65x folder in the C2000Ware SDK, I will also internally confirm about any limitations. 

     TMDSECATCNCD379D: About Ethernet communication (With Beckhoff ET1100 ESC) 

    Regards,
    Shaunak

  • Hey Shaunak,

    The actual motivation behind this is that they want to enable SNMP over Ethernet to support firmware updates.

    Is it possible to Implement SNMP by enabling EoE through the beckhoff et110.

    If possible, What will be the requirements from the hardware and software point of view.

    If not, what is best optimized architecture we can suggest.

    Regards,
    Rupesh

  • Hi Rupesh,

    P65x supports ETHERCAT, so it's not possible/feasible to run ethernet on this device.

    If customer needs ethernet they should use Ethernet enabled device like am261x.

    Any workaround here would have to be implemented by customer and not recommended by TI

  • Hey Nilabh,

    Do we have examples available for SNMP over AM261x? Please share the resources,
    For enabling, there architecture was to go forward with F28P65x + AM263x
    But we can recommend them to move forward with F28P65x + AM261x for running SNMP

    Please help suggest

  • Hi Rupesh

    Do we have examples available for SNMP over AM261x? Please share the resources,

    AM261x has LwIP stack integrated and a few sample LwIP applications in "source/networking/enet/core/examples/lwip" folder.

    The SNMP files are a part of the LwIP stack (not owned by TI): "source\networking\lwip\lwip-stack\src\apps\snmp"

    SNMP is a default LwIP offering. Customer will have to build their own SNMP example depending on the actual SNMP functionality that is needed (e.g. MIB, netconn or raw API support, v2 or v3), similar to how other LwIP examples are in the SDK.

    The effort involved is getting the sample SNMP application files from the stack, compiling it with the application and ensuring the CPSW flow is followed properly (you can remove the UDP/TCP logic and call SNMP APIs instead at application level). Since this is a custom application development over an open-source stack my ask would be for the customer to own this effort.

    Regards,
    Shaunak