F29H850TU: EWPM XLINK featuresby gourps exmaple.

Hang Yang

Part Number: F29H850TU
Other Parts Discussed in Thread: C2000WARE

Hi Experts,

We are looking for examples to show how to enable the xlink by groups?

The only example that involves xlink is ex14_global_load, but this example bind three pwms all together instead of by groups.

Regards,

Hang

29 days ago

0 Prarthan Bhatt 29 days ago

TI__Mastermind 20556 points

Hi,

Please refer to the above section.

Thanks.

0 Hang Yang 28 days ago in reply to Prarthan Bhatt

TI__Expert 4146 points

Hi Bhatt,

Are you saying that this is not supported? From the description. we saw this is supported as in the type-4 xlink scheme, or legacy.

In case this is supported, could you please help providing an example?

Regards,

Hang

0 Prarthan Bhatt 28 days ago in reply to Hang Yang

TI__Mastermind 20556 points

Hi,

The description clearly states use type-4 or legacy XLINK scheme for creating custom groups as explained in case (b) . The description of how to use the legacy XLINK scheme is also described in detail I copied the section above.

If you want the software example you would need to refer to F28P65x XLINK example where the old(legacy) scheme is being used refer to C2000Ware F28P65x EPWM XLINK example.

Thanks

C2000™︎ microcontrollers

C2000 microcontrollers forum

F29H850TU: EWPM XLINK featuresby gourps exmaple.