F28E120SB: No demo code for motor

Milind Bapat

Part Number: F28E120SB
Other Parts Discussed in Thread: C2000WARE, SYSCONFIG

I have recently purchased, DRV8323RH driver board along with LAUNCHXL-28E12X. I have downloaded latest code composer studio v21.01 and motorcontrol SDK 6.00. Unfortunately, I did not get any project for above mentioned dsp with 4 build levels as explained in MotorControl SDK lab document. Is TI yet to release code for the same? If the code is in different name, please guide.

2 days ago

0 Peter Luong 2 days ago

TI__Mastermind 25241 points

Hi Milind,

The solution and example code are provided at the following location in the SDK

C:\ti\c2000\C2000Ware_MotorControl_SDK_6_00_00_00\solutions\sensorless_motor_control_syscfg\f28e12x

This uses SysConfig for generation of the motor control code

Regards,

Peter

0 Milind Bapat 1 day ago

Intellectual 365 points

Thanks, I could open that and compile code. Is this same as universal motor control lab where compile levels are set from 1 to 4?

C2000™︎ microcontrollers

C2000 microcontrollers forum

F28E120SB: No demo code for motor