Schematics for external ADCs attached to Delfino

TIguru

Other Parts Discussed in Thread: CONTROLSUITE, ADS7865

Does TI have any schematics showing how to attach external ADCs (either serial or parallel interface) to a 2834x Delfino device? In advance, thank you for your help.

over 13 years ago

0 Devin Cottier over 13 years ago

TI__Guru 60865 points

The C2834x control card has an ADS7865 ADC on the board (parallel interface). The schematics and layout for all control cards are available in the ControlSUITE software package in the folder ControlSUITE->development_kits->~controlCARDS->CC2834xHWdevPkg.

0 TIguru over 13 years ago in reply to Devin Cottier

Expert 1430 points

Devin

Awesome! I was also able to find a similar schematic here:

http://www.ti.com/litv/zip/sprc905

Now, if you could point me to a schematic showing how to attach one or multiple ADCs with serial interface I will be all set. There has been no definitive decision on the ADC for this design and it could be either parallel or serial interface.

Thank you for your help.

Cheers

0 Devin Cottier over 13 years ago in reply to TIguru

TI__Guru 60865 points

I am not sure that TI has any serial ADC connection examples. What serial interface do you plan on using (SCI, SPI, I2C, etc.)? Or if you are not sure, what external ADC(s) are you considering using?

C2000™︎ microcontrollers

C2000 microcontrollers forum

Schematics for external ADCs attached to Delfino