• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 81 subscribers
  • Views 549 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Load Program Error at TMDSIACLEDCOMKIT

Joseph Lee90700
Prodigy 140 points
Other Parts Discussed in Thread: TMS320F28027


Dear Master,

 

Using TMDSIACLEDCOMKIT  & example of IsoAcLighting, I have tried to upload program.

Unfortunately I failed I checked the followed message.(I think JTag connection is right.)

Could you help me?

======================

C28xx: Flash Programmer: Warning: The configured device (TMS320F28027), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:
Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: GEL Output:
Device Calibration not complete, check if device is unlocked and recalibrate.C28xx: Flash Programmer: Error erasing flash memory. Device is locked or not connected. Operation cancelled
C28xx: Flash Programmer: Error erasing Flash memory.
C28xx: Flash Programmer: Device is locked or not connected. Operation cancelled.
C28xx: Trouble Writing Memory Block at 0x3f715a on Page 0 of Length 0x65
C28xx: GEL: File: C:\work_ccs5\IsoACLighting\F2802x_FLASH\IsoACLighting_FLASH.out: Load failed.

======================

  • 0
    TI__Guru 57255 points

    Joseph,

    Based on the error message you are seeing I would recommend:

    1. Can you confirm your target configuration.   For most of the TMDSIACLEDCOMKIT projects, the configuration should be a xds100v1 emulator with a TMS320F28027 device (for the PLC project the device should instead be F28035)
    2. Can you confirm that the controlCARD placed into the board is a F28027 controlCARD. 
    3. What version of Code Composer are you using?

    Thank you,
    Brett

  • 0 in reply to Brett Larimore
    Prodigy 140 points

    Thank you for your recommendation.

    I reply as follows.

    1. Yes. I am using xds100v1 with 28027

    2. Yes.

    3. Code composer version :  Version: 5.1.0.09000