Other Parts Discussed in Thread: TMS320F28335
Hello,
I need to configure the TMS320F28335 JTAG pins in a way that will allow me to program the on chip flash via SPI Interface. The plan is to have another micro processor, receive a firmware upgrade file for the TMS320F28335 DSP, and then program the TMS320F28335 via SPI.
First off, is this possible on the TMS320F28335? and if so, how do I go about implementing it? what pins do I need to pull up/pull down.
Please help
Thank you,
Kamal Premachandra
