A Question about MotorCtrl+PfcKit, it cannt build pass

Mical

Other Parts Discussed in Thread: CCSTUDIO

I use sprc922 and sprc675, when I open anyone project and "rebuild all", it tell error, auch as:

[Linking...] "C:\CCStudio_v3.3\C2000\cgtools\bin\cl2000" -@"F2803x_FLASH.lkf"
<Linking>
>> error: system error reading file 'C:\TI_F28xxx_SysSW\MotorCtrl.obj': No
such file or directory

>> Compilation failure

Build Complete,
2 Errors, 0 Warnings, 0 Remarks.

over 16 years ago

0 AartiG over 16 years ago

TI__Guru**** 173310 points

Which project are you trying to build and did you make any modifications to the project or building as-is?

0 ChrisClearman over 16 years ago in reply to AartiG

TI__Guru** 119680 points

Can you try dowloading and installing all of the software again?

http://focus.ti.com/mcu/docs/mcuprodmsptoolsw.tsp?sectionId=95&tabId=1222&familyId=916&toolTypeId=1

I haven't had any issues using this board, and I don't see why CCS would be looking for \motorctrl.obj. This doesn't exist and isn't used. Very strange.

0 ChrisClearman over 16 years ago in reply to ChrisClearman

TI__Guru** 119680 points

Oh, and make sure your active configuration drop down menu is on F2803x_RAM, not _Flash

0 Mical over 16 years ago in reply to ChrisClearman

Prodigy 50 points

Thanks, maybe my soft of CCS is old, change the lasted, the problem is disappear[:)]

0 Guo Yanhong over 14 years ago in reply to Mical

Prodigy 20 points

Just remove the "+" char from your dir. enjoy!

C2000™︎ microcontrollers

C2000 microcontrollers forum

A Question about MotorCtrl+PfcKit, it cannt build pass