• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 582 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Beginer for TMS320F28335

Chintan Chauhan
Prodigy 220 points
Other Parts Discussed in Thread: TMS320F28335

hi,

All

I have just finished hardware design for my system based on TMS320F28335 and i have taken referance from ezdsp 28335 for hardware design with jtag connector and all requiredfields, Now my question how to start software design i have taken CCS for software development  but i required some sample C code  for GPIO initialization and other peripherals.

And for TMS is there any serial programming through RX TX pin like ARM Controllers with program download utility. [serial programming]

So anyone can suggest for [serial programming] for TMS.

 

 

Chintan,

TRINITY ENERGY SYSTEMS

[INDIA]

  • 0
    Prodigy 110 points

    hi ,

     

    First of all for sample codes you can get it in  TI website . In "getting Started" or C and C++ peripheral examples Files.

     

    For Serial programming     . Go to www.spectrumdigital.com    website  . Go for Drivers and Downloads   then     C2000   .. you will find a Tool called SD flash for serial flashing  . it also has links for algorithms  

     

    Sreeharsha Aithal

    Hasoft Power

  • 0 in reply to harshaAithal
    Prodigy 220 points

    Hi,

    Sreeharrsha,

    Thanks for replying i have just visited TI website for sample code and about to download...

     

    And from spectrum digital also i have downloaded sdf28xx_v3_3_serial

    Will ask u further if require any more help .

     

    Thanks,

    Chintan