Interrupt handling in TMS320F2812

vedant chendake

Other Parts Discussed in Thread: TMS320F2812

Hi,

I am using TMS320F2812 processor.In SPI ISR i am processing lot functionality but the PIE group acknowledgment i am doing before this processing.Since i am running into the ISR but as i have acknowledged PIE group i can get one more interrupt.In this scenario how processor will response.In short interrupt context switching is possible in this processor .?

Thanks in Advance

over 13 years ago

0 Jens-Michael Gross over 13 years ago

Guru 227245 points

vedant chendake said:
I am using TMS320F2812 processor.

Fine. And this is the MSP430 microcontroller forum. Despite the slight similarity in the name, the two are completely different and it would be rather coincidental to find someone here who could help you.

0 Katie Pier over 13 years ago in reply to Jens-Michael Gross

TI__Guru* 79301 points

Hi Vedant,

I'm going to move this to the C2000 forum, where you should be able to get some advice on this part.

Regards,

Katie

UPDATE: Looks like Lori already is helping you here: http://e2e.ti.com/support/microcontrollers/tms320c2000_32-bit_real-time_mcus/f/171/t/225686.aspx

C2000™︎ microcontrollers

C2000 microcontrollers forum

Interrupt handling in TMS320F2812