• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 81 subscribers
  • Views 580 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

F28335 I2C Boot Example

Tim Love
Expert 5340 points

Team,

A customer of mine is looking for a ready made example that can boot from the I2C of the F28335 eZdsp. Before developing an example I was curious if anyone has an example readily available. Does anyone have one they could share?

Regards,

Tim Love

  • 0
    TI__Intellectual 2690 points

    Tim,

     I have an S19 file that boots via I2C on 28335 (and toggles GPIO0) which we use for testing the I2C bootload function. The S19 file can be programmed as-is via any programmer into the I2C EEPROM. The original source code is not included. It basically is just a normal CCS project which generates a .out and the c2000 hex utility was used to add the boot ROM headers for I2C and convert to an s19.  I have attached the S19 to this post (zipped).

    -Chrissy "Peng" Chang

    28x_Gpio0Toggle_I2C.zip