dead band timer frequency

kiran kumar2

Other Parts Discussed in Thread: TMS320F2812

i am using tms320f2812. formula for dead band value = m*p*t. where "m" varies from 1 to 16 (by using DBTCONA [11-8]). "p" varies from 1 to 32 (by using DBTCONA [4-2]).

but how to decide the value of "t" in the above mentioned formula. any suggestion please...

over 13 years ago

0 Brett Larimore over 13 years ago

TI__Guru 57255 points

kiran,

I believe that 't' corresponds to the HSPCLK, the clock which goes to the EV peripherals.

See Table 2-1 of the below which shows the settings for a 25ns HSPCLK:
http://www.ti.com/lit/spru065

Thank you,
Brett

0 kiran kumar2 over 13 years ago in reply to Brett Larimore

Intellectual 325 points

thank you.

C2000™︎ microcontrollers

C2000 microcontrollers forum

dead band timer frequency