ADC of 2812 DSP -reg

ARUN MATHEW

Prodigy 60 points

Sir

I have to give an analog signal through my ADC on board to DSP. What are the current and voltage limitations.

over 13 years ago

0 Brett Larimore over 13 years ago

TI__Guru 57255 points

Arun,

This information can be found in the F281x device datasheet (under Electrical Specifications in the Analog-to-Digital Converter section).

This and other F281x information can be found at the product page:
http://www.ti.com/product/tms320f2812

Thank you,
Brett

C2000™︎ microcontrollers

C2000 microcontrollers forum

ADC of 2812 DSP -reg