XDS510LC with Concerto Devices and SDFlash

KarlheinzRieber

Other Parts Discussed in Thread: UNIFLASH

Hi there,

I´ve got a questions about the Concerto devices and the XDS510LC.

I know that the emulator does not work for debugging the concerto devices. However, is it sufficient if only programming of the Concerto is needed (by SDFlash)?

Thanks,

Karlheinz

over 12 years ago

0 KarlheinzRieber over 12 years ago

Intellectual 550 points

Another question: Instead of the SDFlash by Spectrum Digital, does programming of both cores in the Concerto devices work with the Uniflash tool by TI and the emulator XDS510LC?

Best thanks in advance...

0 Brett Larimore over 12 years ago in reply to KarlheinzRieber

TI__Guru 57255 points

Karlheinz,

I do not believe the XDS510LC supports the Concerto series at all. This ranges from debug to flashing.

To double check I would contact Spectrum Digital:
www.spectrumdigital.com/contact_us.php

I would recommend the cheaper xds100v2 or faster xds200 emulator for use with Concerto. Both are available from Spectrum Digital.

Thank you,
Brett

C2000™︎ microcontrollers

C2000 microcontrollers forum

XDS510LC with Concerto Devices and SDFlash