problem in reading the GPIO pin

Iragouda Patil1

I'm using F28M35X series concerto card here i'm trying to read the the GPIO pin but in PORTA pin no 0 its not working ..continuously high voltage is

geeting .can any one help to solve this problem .

Regards

Patil

over 13 years ago

0 Igor Gorbachev over 13 years ago

Guru 20525 points

Hi!

I would recommend you pay attention to the correctness of an initialization for your port. Check to make sure this port is configurated for input.

Regards,

Igor

0 Lori Heustess over 13 years ago

TI__Guru* 93800 points

Iragouda Patil1 said:

I'm using F28M35X series concerto card here i'm trying to read the the GPIO pin but in PORTA pin no 0 its not working ..continuously high voltage is

geeting .can any one help to solve this problem .

Regards

Patil

Which core is the pin mapped to?

Which core is trying to read the pin?

Do other pins show the same issue?

Does this errata apply? www.ti.com/lit/SPRZ357

C2000™︎ microcontrollers

C2000 microcontrollers forum

problem in reading the GPIO pin