• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 229 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Help for a beginner.

irfan rashed
Intellectual 270 points


Hello Sir,

I am rashed, student from Korea. I have recently purchased TMS320F28335-starter kit for signal processing of some sensors.

I need to use SPI configuration for my sensors.

As I am entirely a beginner, I help some support from you in terms of how exactly can I configure SPI in DSP. I have been reading the datasheets and reference manuals, but still there is lot of problem to get a start-up.

Also, for one of my sensors I need to use a "Interrupt request' pin in the DSP to be connected to the sensor.

I request you to please help me in this regard as I am in a most difficult situation presently.

Thank you for your help in hope of a quick response.

Regards,

Irfan.

  • 0
    Prodigy 110 points

    hi

    1-First you must download C2833x/C2823x C/C++ Header Files and Peripheral & Examples that Contains helpful examples and libraries from

    http://www.ti.com/tool/sprc530

    2-use F28335 Multi-Day Workshop or F28335 One Day Workshop  from

    http://processors.wiki.ti.com/index.php/C2000_Archived_Workshops

    3-This address is also useful

    http://www.powersimtech.com/manual/Tutorial%20-%20How%20to%20Use%20SPI%20in%20TI%20F28335%20Target.pdf

    Good luck

    m.mazraeh