• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 81 subscribers
  • Views 241 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Cycle Clock F2802x

Matt
Intellectual 890 points

Hi

I do some performance measuring on my F2802x device.

I saw today this nice CCS tool a Cycle Clock, see:

http://processors.wiki.ti.com/index.php/Profiling_on_C28x_Targets

Sadly the clock didn't run. Did anyone already used this feature with a F2802x device?

Kind regards

Matt

  • 0
    TI__Guru 57255 points

    Matt,

    I have been able to run the Profile Clock on the F28027 previously.  The steps following "To setup the profile clock" are the same instructions that I followed.

    If your device is running from FLASH, keep in mind that there are not very many hardware breakpoints available.  As a result, I would only set one breakpoint at any one time.

    What version of CCS are you running?


    Thank you,
    Brett

  • 0 in reply to Brett Larimore
    Intellectual 890 points

    Brett,

    I tried again and did the steps in the manual exactly. Now I got it to work.

    I'm using the CCSv4.2.3.00004.

    Thank you for your help. It was helpfull to know that it should work with my setup.

    Regards

    Matt