• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 612 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Driving Switched Reluctance Motor with DSP

sofiane Fahas
Intellectual 280 points
I want to driving a switched reluctance motor, with DSP, i read a Texas Instruments document, dealing with this subject  Switched Reluctance Motor Control  Basic Operation and Example Using the TMS320F240 , but in Texas Instruments  internet site, i read to this DSP does not existe actually ]

Then, what's the new DSP number using for this application, and can you propose me, an interface , if your DSP does not accept analogical Input In generally, what can you propoe me, for my project, and propose me please a quote (price) for your materiels, and thank youy very much
Best regard 

  • 0
    TI__Guru* 84110 points

    Sofiane,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages. Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics.

    It is not always obvious how our forum is sub-divided. We have certain ways to organize things, but there are sometimes small key points. For example, we refer to our C2000 devices as Microcontrollers. So if you go to the Microcontrollers grouping from the main E2E page, you will find the C2000 forum. That is where the right experts are to answer your question, instead of this C67x Single Core DSP Forum. Sorry for the confusion.

    A moderator will move this thread to that forum for you this time.

    Regards,
    RandyP