Video: InstaSPIN-MOTION overview

dear ChrisClearman

I need information about the structure of the InstaSPIN controller? and its equations and block diagram?

thanks

Have you read the UG?

We don't give the equations for FAST. For everything else source code is provided.

yes i read. i need more information because i need going to matlab for simulation!

thanks

you can not yet simulate our FAST observer in Matlab.

we are looking at potentially sharing encrypted blocks, but only if we are sure of their security...so no promises anytime soon.

Hi Chris,

I know the equations for FAST is not  provided. But can you tell me the FAST  is expert self-learnning or MARS or others?

FAST is circuit model based, that's as much as we are going to say.

The Motor Identification portion is very straight forward and well documented in the User's Guide linked above.  It would take minimal effort to implement yourself for at least the Rs ID. However, part of what enables the Flux and Ls ID is the fact that FAST is being used as a sensor to confirm a frequency and itteratively close the loop.  I believe if you had an encoder based system you could implement our ID process relatively easily based on the UG, but it would be very challenging using other sensorless software estimators.