RE:Altium CAD models F28335

ScottC978

Other Parts Discussed in Thread: TMS320F28335

Hello

Is there Altium Designer CAD models (specifically Schematic models) available? What IBIS and BSDL files and can they be converted to Altium Designer models?

Thank you,

Scott

over 12 years ago

0 Gautam Iyer over 12 years ago

Guru 192875 points

Hi Scott,

The ".sch" files are readily available for kits and cards. Any specific schematic you were looking for?

Regards,

Gautam

0 ScottC978 over 12 years ago in reply to Gautam Iyer

Prodigy 80 points

Hello Gautam,

Thank you for the response. I am looking for Altium schematic decal for the TMS320F28335(PGFA).

Thank you,

Scott

0 E_ over 9 years ago in reply to Gautam Iyer

Intellectual 360 points

Hello Gautam,

I found some Altium-Models on the altium-website but not the specific one for the f28335-Chip. I'd like to try an own design.
Could you help me?

Looking forward to your answer.

Regards,
Erich

0 Gautam Iyer over 9 years ago in reply to E_

Guru 192875 points

Erich, did you check this: www.ti.com/.../quality

0 E_ over 9 years ago in reply to Gautam Iyer

Intellectual 360 points

oh, no, I did not... thank you!

0 Gautam Iyer over 9 years ago in reply to E_

Guru 192875 points

Excellent!

Goodluck & Regards,
Gautam

0 E_ over 9 years ago in reply to Gautam Iyer

Intellectual 360 points

Sorry, but why should a thread be closed? Maybe a person has similar problems and wants to ask a detail more which is still not answered. This just creates a massive load of threads.

0 Gautam Iyer over 9 years ago in reply to E_

Guru 192875 points

Hehe... Thread close means : There's solution available for the subject line! ie a thread with 'Verified Answer'
Anyone can post later.

0 E_ over 9 years ago in reply to Gautam Iyer

Intellectual 360 points

Ok, in theory I'd agree but there was an occasion where I needed help on a closed topic. I posted and there was no reaction. I cannot remember whether I opened another thread by myself and asked or if I was pmd or else but I got the message that no one reacted as the answer had been verified.

0 Gautam Iyer over 9 years ago in reply to E_

Guru 192875 points

Actually... It is encouraged to post a new query if the current/past ones don't resolve your issue instead of hijacking the way-older thread! Hence no replies I guess :)

0 Gautam Iyer over 9 years ago in reply to E_

Guru 192875 points

Blake TI Community would you like to answer this by E_

0 Blake TI Community over 9 years ago in reply to Gautam Iyer

TI__Guru* 92935 points

Gautam Iyer said:
Actually... It is encouraged to post a new query if the current/past ones don't resolve your issue instead of hijacking the way-older thread! Hence no replies I guess :)

Replies on older threads will be tougher to catch. If there is a reply on it, will need to be on topic with the rest of the thread.

If you have an existing thread that needs a reply, you can ping it or reach out and will see what we can do to assist further.

C2000™︎ microcontrollers

C2000 microcontrollers forum

RE:Altium CAD models F28335