Concerto Kernel ARCH

Tjarco Boerkoel

Expert 1725 points

Other Parts Discussed in Thread: CONTROLSUITE

Hi CommuniTI!,

I'm discovering the Concerto and was wondering, is there an arm M3 kernel arch available for MMU-less linux?

I would be great to have this in parallel to the C28 core!

Best regards,

Tjarco

over 12 years ago

0 MaciejKucia over 12 years ago

Mastermind 7925 points

There is uC Linux but if you need RTOS there are better options. (and bare-metal is the best of them)

Regards,
Maciej

0 Tjarco Boerkoel over 12 years ago in reply to MaciejKucia

Expert 1725 points

Hi Maciej,

Yes I know uClinux, but the ARM arch is not available with Concerto supported. I believe the Davinci is supported and also the Stellaris is integrated, but there's no arch available (as far as I'm aware of) with support for Concerto M3 peripherals (Uart, PHY, etc). I don't need a RTOS, these task for the C28 controller core.

Best regards,

Tjarco

0 MaciejKucia over 12 years ago in reply to Tjarco Boerkoel

Mastermind 7925 points

You could try with Stellaris implementation. ARM core in Concerto is very very similar to Stellaris (at least comparing StellarisWare to ControlSuite Concerto software).

Regards,
Maciej

C2000™︎ microcontrollers

C2000 microcontrollers forum

Concerto Kernel ARCH