Other Parts Discussed in Thread: TMS320F28335
Hi ,
i am working on delfino TMS320F28335 controller ,here i am facing problem in debug the code in our target board ,
When I tried to "Debug to target board" it gaving following error
C28xx: Flash Programmer: Warning: The configured device (TMS320F28335), does not match the detected device (). Flash Programming operations could be affected. Please consider modifying your target configuration file.
C28xx: GEL Output:
ADC Calibration not complete, check if device is unlocked and recalibrate.C28xx: GEL Output:
ADC Calibration not complete, check if device is unlocked and recalibrate.C28xx: File Loader: Data verification failed at address 0x00008000 Please verify target memory and memory map.
please suggest me how to solve this problem.
