HV DC/AC Inverter Kit

Prasanna Piya

Other Parts Discussed in Thread: CONTROLSUITE

When I compiled the code for HV DC_AC Inverter Kit for F28035 controller I get errors which points to file "SolarHv_DCAC-F28035_FLASH.CMD" with in which tese lines are the errors

105 vectors : > VECTORS PAGE = 0, TYPE = DSECT

106

107 DLOG : > dataRAM, PAGE = 1

Can someone help me with this

over 12 years ago

0 Gautam Iyer over 12 years ago

Guru 192875 points

Hi,

Try closing the SolarHv... project before building HV DC_AC project.

Regards,

Gautam

0 Prasanna Piya over 12 years ago in reply to Gautam Iyer

Prodigy 220 points

The project is SolarHV_DCAC and SolarHv_DCAC-F28035_FLASH.CMD is file in the project

0 Gautam Iyer over 12 years ago in reply to Prasanna Piya

Guru 192875 points

Ohk, close the project and delete it from the workspace. Import the same project from controlSuite to your workspace and check with the results.

Regards,

Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

HV DC/AC Inverter Kit