Schematic and BOM for TMDSHV1PHINVKIT

Timothy Starr

Other Parts Discussed in Thread: CONTROLSUITE

Hi -

We need the schematic and the bill of material for the TMDSHV1PHINVKIT reference design. Could someone please send me the link or send me the documents? Thanks and Best Regards,

-Tim Starr on behalf of JC@SI

timothy.starr@avnet.com

over 12 years ago

0 LeonardEllis over 12 years ago

TI__Guru 71526 points

Tim,

Altium design files being sent to you via direct email.

-Leonard

0 Victor Bez over 12 years ago in reply to LeonardEllis

Prodigy 20 points

Hi, Leonard.

We also need the schematic and the BOM for the TMDSHV1PHINVKIT . Be so kind to send me information, please.

Have a nice day!

Best Regards,

-Victor Bez

inno@sibnet.ru

0 Brett Larimore over 12 years ago in reply to Victor Bez

TI__Guru 57255 points

Victor,

If controlSUITE is installed, you may find all the information (documentation, schematics, software, etc) on the kit here:
\controlSUITE\development_kits\HV_SOLAR_DC_AC_v1.1\

Thank you,
Brett

0 Victor Bez over 12 years ago in reply to Brett Larimore

Prodigy 20 points

Thank you!

Victor.

0 user4220332 over 11 years ago in reply to Brett Larimore

Prodigy 30 points

Hello Brett. I have installed controlsuite, but in the documentations are not the schematics.

Could you please send them to me?

Thank you

0 Gautam Iyer over 11 years ago in reply to user4220332

Guru 192875 points

This is the folder: C:\ti\controlSUITE\development_kits\HV_SOLAR_DC_AC_v1.1\~SOLAR_HV_DC_AC_HWDevPkg

0 user4220332 over 11 years ago in reply to Gautam Iyer

Prodigy 30 points

Ok, thank you.

0 Raul Zubillaga over 11 years ago in reply to Gautam Iyer

Prodigy 30 points

Hi all,

we have received thw kit - TMDSHV1PHINVKIT, with the Board version indicating V2.2, but the schematich in control suite is V1.1, Is there any schematic updated?

Thankls!

0 Brett Larimore over 11 years ago in reply to Raul Zubillaga

TI__Guru 57255 points

Hi Raul,

V1.1 is the package's software/documentation release number for controlSUITE.

V2.2 (which is, as you've stated) is the board's revision number. Taking a look at the pcb drawings in the below should help give you more confidence:
\controlSUITE\development_kits\HV_SOLAR_DC_AC_v1.1\~SOLAR_HV_DC_AC_HWDevPkg\Solar_HV_DC_AC_Sch_PCB.pdf

So, to summarize, the 1PH inverter kit's collateral is currently V1.1 and it runs on V2.2 of the hardware. I'm sorry for the confusion, but hopefully this helps.

Thank you,
Brett

0 Raul Zubillaga over 11 years ago in reply to Brett Larimore

Prodigy 30 points

Thx Brett!!!
Clear!

C2000™︎ microcontrollers

C2000 microcontrollers forum

Schematic and BOM for TMDSHV1PHINVKIT