memory gauge/usage in CCS4.0

Chinmay Shah

Expert 1085 points

Other Parts Discussed in Thread: TMS320F28035

Dear Friend,

I'm using TMS320F28035 MCU in CCS4.0 IDE.

Here I’ve attached a screen shot for the error generated in CCS (Active Build Config: FLASH).

Perhaps the FLASH is full.

How can I check the memory gauge for my code? Can I expand the FLASH memory (code section) by use of FLASH API?

0 Igor Gorbachev over 12 years ago

Guru 20525 points

Hi!

According to your screenshot you need to allocate more flash memory for .econst & .switch sections. You can try to edit CMD file,for example, thus:

.econst : >> FLASHA | FLASHC | FLASHD, PAGE = 0

.switch : >> FLASHA | FLASHC | FLASHD, PAGE = 0

Regards,

Igor

0 Chinmay Shah over 12 years ago in reply to Igor Gorbachev

Expert 1085 points

Thanks Igor. I've made some changes in .CMD file and expand the range of sectorA (of course, for Program code!). It works now.

But still I'm waiting for my Qs about how to check the memory gauge of my program code?

Thanks for everything.

0 Gautam Iyer over 12 years ago in reply to Chinmay Shah

Guru 192875 points

Hi Chinmay,

I hope this answers your question.

Regards,

Gautam

0 Igor Gorbachev over 12 years ago

Guru 20525 points

Hi Chinmay!

chinmay shah said:

How can I check the memory gauge for my code?

You can use MAP file for this goal. I think this wiki link will be useful also http://processors.wiki.ti.com/index.php/C28x_Compiler_-_Understanding_Linking

Regards,

Igor

0 Chinmay Shah over 12 years ago in reply to Gautam Iyer

Expert 1085 points

Thanks Gautam

0 Gautam Iyer over 12 years ago in reply to Chinmay Shah

Guru 192875 points

I hope you've received answer for your question, right?

If yes then please click verify answer button, so that one closes this thread!

Regards,

Gautam

C2000 microcontrollers forum