Attention: ccs4.2.3 given by the DRV8312evm KIT does not work after complete installation

Wang haifeng

I posted the problem last week but no solution was given.

I have to post it again because it is a basic software problem from TI. I bought the BLDC kit from TI but the CCS given by the kit can not run. How can a customer use it?

Please help me solve the problem.

Thank you again

over 12 years ago

0 ChrisClearman over 12 years ago

TI__Guru** 119680 points

Hi, Wang.

Sorry you are having problems. Your problem statement is very broad, it's hard to offer much helpful advice. I know the projects were developed in CCSv4, but if you import them into a CCSv5.5 they should work right away, I've never had a problem doing this and CCSv5 is much better.

I'm imported and built some of the DRV8312-C2-KIT projects and they work just fine.

http://processors.wiki.ti.com/index.php/Download_CCS