Hi,Sir!
I know CLA task can acess ADC result register and some pwm registers, just some of their registers can be accessed by CLA task.
I don't find special chapter which explain which registers can be accessed by CLA task.
It is right?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,Sir!
I know CLA task can acess ADC result register and some pwm registers, just some of their registers can be accessed by CLA task.
I don't find special chapter which explain which registers can be accessed by CLA task.
It is right?
on F28069 this is the case, only the ADC result registers
On F28035 only ADC result and PWM , no access to ECAP or QEP
There are variation from device to device.. datasheet/TRM should have the details
For example F28069 http://www.ti.com/lit/ds/symlink/tms320f28069.pdf Pg 79 mentions it very clearly, when nothing is mentioned assume all registers