Neural Network macro for f28035

Hello!

Perhaps these links will be useful for your issue

http://processors.wiki.ti.com/index.php/MatLab_and_CCS

http://www.mathworks.com/products/neural-network/ (Neural Network Toolbox provides supporting Simulink)

http://www.youtube.com/watch?v=Pcx-VGU1MIM

Regards,

Igor

The problem is that ccsv5 is not supporting all features that ccsv3 does. Should I use ccsv3 for my project I'd never ask about it on this forum, I cannot execute - load, halt run reset load read and other functions from matlab to control card having installed ccsv5 on my computer. What I succeeded is to generate code for given simulink model and load and run it on control card. If there is a possibility to create a IDE_Object with ccsv5 and load  with it any .out file, I could load all variables I need for my NN.

Thank you for links though.

May be it makes sense to place your post at Code Composer Studio Forum.

Regards,

Igor

Hi, I am currently working on the same problem. I would like to know how you solve the issue and we can discuss more about the dsp implementation of NN. Thanks.

in my files I have a NN with Matlab 2010, CCSV3.3. The microcontroller I used is the tms320f28027.
Regards
Gastón

Hi Gaston,

Could you please send me the files. Thanks very much!
My eamil is: montanasjy at gmail dot com

Best,
Junyi

But the simulink model was made in matlab 2010, to run de NN I used the F28027. I used the CCSV3.3 because I programmed the Run, Load and Halt entirely in Matlab . What I can't see in my profile are the files. . What I can't see in my profile is the files I upload. If I can find those files I'll try to upload them again or send them to you.
Regards
Gastón

Hi Junyi,

   In the end I ended up writing a function in c from scratch. And a special matlab function which extracts necessary parameters from NN and writes it to c function. I worked for me like that. 

thanks

Hi guys,

                This is my NN. I design this NN to control the air conditioner and the illumination of one Room (using Matlab 2010 and CCSV3). I've used wireless sensors to measure the temperature and the illumination of the room and feed the NN to control each variable. If you are using the NN you know the theory, I used a Backpropagation Neural Network to do the Job. The file contain the simulink model, the .m file for the Load,Run,Halt and the program for the F28027.

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/171/NN.7z

Hope this help you

Gastón

PS : What happened with the files to share in the forum?

I forget to tell that the text is in spanish :)