• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 445 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MATLAB embedded code generator and ide link

Georgios Lempidis
Prodigy 100 points


Hi untill now i was using MATLAB and ccs 3.3  to program the c2000 f28335 microcontroller.
Now we got the new ccs 4 version and is not possible to make the ccs4 to work with matlab.

 

MATLAB is still calling the 3.3 version

 

thanks in advance for your time

  • 0
    Prodigy 60 points

    Your best option is to downgrade back to CCS 3.3. And make sure you have the right version of Code-Gen tools too. We got burned using the newer version. We contacted MATLAB and their response was "to use version x.x.x". 

    Second option is to contact MATLAB and tell them you need support for CCS v4...which you most likely won't get until the next quarterly release of MATLAB (at best).

    Good luck.

     

  • 0 in reply to Jon Young
    Prodigy 100 points

    I got informed that the support of CCS 4 eill be at MATLAB 2010a

     

    Is posible to find and download the CCS 3.3 trial version?

     

    I had downloaded in the past and it was for 120 days trial.

    This can solve my problem untill MATLAB supports the 4 version