• Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 135 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Error Connecting to target

Samuel Christopher
Intellectual 375 points

Other Parts Discussed in Thread: UNIFLASH

hi

i am getting following error when iam trying to debug for CPU timers for C2000  family F28027Board

Error connecting to the target 

(Error-1051@ 0x0)

Device is not responding to the request .Device may be locked,or the emulator connection may be unreailable.unlock the device if possible(e.g use wait in reset mode and power cycle the board).if error persists,conform confuguration and/or try more reliable JTAG setting
(e.g lower TCLK).

(Emulation pacakage 5.1.232.0)

  • Guru 192875 points

    Hi,

    First of all run a JTAG Integration test by going to target connection and clicking on Test Connection. Check whether the test passes or not. If it passes then use CCS Uniflash to unlock the flash. Do check and let me know.

    Regards,

    Gautam