Problem running correct C code on TMS320F28335 eZdsp

Alaa Jaber

Other Parts Discussed in Thread: TMS320F28335

Hi, am facing some difficulty running the attached c code. This was generated by Matlab and runs fine on desktop C compilers. Can somebody please have a look and give me the detailed instructions to execute this code on the TMS320F28335 eZdsp (or supply a working project with the proper board configuration)?

Thanks!

project.zip

over 12 years ago

0 Gautam Iyer over 12 years ago

Guru 192875 points

Hi AJ,

Are you sure this code is meant for F28335 or C2000 controllers?

Please check this video: www.youtube.com/watch?v=kiVOA5Js7A

Do check out more videos on youtube.

Regards,

Gautam

0 Alaa Jaber over 12 years ago in reply to Gautam Iyer

Prodigy 160 points

Hi Gautam,

Firstly thanks for your reply. Secondly, I have tried to open the video, but unfortunately it is not existing. Also, I have generate this code from matlab script and and I want it to run on TMS320F28335 eZdsp. So, do you think it can not be run on c2000 controller?

Any help will be highly appreciated.

Best wishes,

Alaa.

0 Gautam Iyer over 12 years ago in reply to Alaa Jaber

Guru 192875 points

Hi Alaa,

Try this out:

https://engineering.purdue.edu/~ece495/Power_Electronics_Lab/exp2.pdf

https://www.google.co.in/#q=simulink+ccs+c2000

Regards,

Gautam

0 Alaa Jaber over 12 years ago in reply to Gautam Iyer

Prodigy 160 points

Hi Gautam,

Thanks again for your help, but unfortunately this video is not found, as well.

Best wishes,

Alaa.

0 Gautam Iyer over 12 years ago in reply to Alaa Jaber

Guru 192875 points

Alaa, did the pdf help you? Also check these out:

https://www.youtube.com/results?search_query=simulink%20ccs%20c2000&sm=3

Regards,

Gautam

0 Alaa Jaber over 12 years ago in reply to Gautam Iyer

Prodigy 160 points

Gautam,

Yes, they are realy helpful, but the problrm I could not build the wavelet transform in Simulink. Therefore, I have built it using Matlab script and the generated c code from the script. And as I said I could not manage to download the generated c code on the TMS320F28335 eZdsp.

Best wishes,

Alaa.

0 Gautam Iyer over 12 years ago in reply to Alaa Jaber

Guru 192875 points

Alaa,

Matlab based support in this forum is very limited and I would request you to check with the Matlab forums.

Do check this link for examples: http://www.mathworks.in/help/rtw/examples/index.html

Regards,

Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

Problem running correct C code on TMS320F28335 eZdsp