Boot loader for upgrading the Firmware through CAN communication in Field , Controller : TMS320F28030

vinay kumar6

Other Parts Discussed in Thread: TMS320F28030, CONTROLSUITE

Hello,

We are in need of developing a bootloader for uprading the firmware of the Electronic Control unit which have TI Processor : TMS320F28030.

Requesting you to let us the approach avaliable for its implementaion and API required for it. As per preliminary understanding it will need Flash API to erase the existing code and rewrite it.

Thanks in advance.

over 11 years ago

0 Gautam Iyer over 11 years ago

Guru 192875 points

Hi Vinay,

i would like you to go through Section 2.20 of this doc:

http://www.ti.com/lit/ug/sprugo0a/sprugo0a.pdf

I hope this makes your task easier.

Regards,

Gautam

0 vinay kumar6 over 11 years ago in reply to Gautam Iyer

Prodigy 100 points

Hi Gautam,

Thanks a lot for your reply.

I have gone through the document, however could you please help in approach avaliable in to uprade the firmware in the field thourgh CAN communication.

Thanks and Regards,

Vinay Kumar

0 Gautam Iyer over 11 years ago in reply to vinay kumar6

Guru 192875 points

Here's how you can start with:

C:\ti\controlSUITE\libs\utilities\boot_rom\2803x

You can also check the "CAN_Boot.c" here: C:\ti\controlSUITE\libs\utilities\boot_rom\2803x\2803x_boot_rom_v1

Check: http://e2e.ti.com/support/microcontrollers/c2000/f/171/t/155583.aspx

Regards,

Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

Boot loader for upgrading the Firmware through CAN communication in Field , Controller : TMS320F28030