TMS320F2812

MALLAR MUKHOPADHYAY

Other Parts Discussed in Thread: TMS320F2812

I have made a simulink model which gets processed by the DSP TMS320F2812.I need to find the Fourier transform values of a signal which I am giving as input at the ADC input port. I need to check the values of the calculated FFT values stored in the memory, but I can't find where it is getting stored as in the program generated "auto storage of data" is being shown as a comment.

over 12 years ago

0 Gautam Iyer over 12 years ago

Guru 192875 points

Hi,

Which version of CCS are you using? Secondly, do you generate directly the .out/.hex file from simulink or only just the code using code generator? In short I would like to know the process you follow.

Regards,

Gautam

0 MALLAR MUKHOPADHYAY over 12 years ago in reply to Gautam Iyer

Prodigy 30 points

Hello,

Thank you for the reply. I am using CCS V 3.3 . After creating the simulink model I build it using the code generator.

If you can suggest some other methods it will be helpful as I am very much new to this processors and CCS

0 Gautam Iyer over 12 years ago in reply to MALLAR MUKHOPADHYAY

Guru 192875 points

Why not use CCS itself for writing the code and debugging it later? You can make use of the latest CCS features.

You can get all the peripheral headers and example code here: http://www.ti.com/tool/sprc097

Regards,

Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMS320F2812