• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 81 subscribers
  • Views 403 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Concerto F28M36P53 Tool Support

Nelson Norris
Intellectual 930 points

Other Parts Discussed in Thread: UNIFLASH, F28M36P53C2, F28M36P63C2

When will CCS and Uniflash be updated to support the Concerto F28M36P53C2 parts?  I can program with the existing tools, but they give a warning since the flash is smaller on the P53 than the P63.

  • 0
    TI__Guru 57255 points

    Hi Nelson,

    We were not aware of this issue until now.  We are now looking into this and will send you an update once we know more.


    Thank you,
    Brett

  • 0 in reply to Brett Larimore
    Intellectual 930 points

    Here are the warnings from CCS (similar in Uniflash):

    M3: Flash Programmer: Warning: The configured device (F28M36P63C2), does not match the detected device (F28M36P53C2). Flash Programming operations could be affected. Please consider modifying your target configuration file.

    M3: GEL Output: Watchdog Timers Enabled

    M3: GEL Output: UARTs Enabled

    C28x: Flash Programmer: Warning: The configured device (F28M36P63C2), does not match the detected device (F28M36P53C2). Flash Programming operations could be affected. Please consider modifying your target configuration file.

     

    Nelson