• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 266 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

piccolo F28069 USB stick interfacing with a stepper motor

Gourav Zutshi
Prodigy 230 points
Other Parts Discussed in Thread: TMS320F28069, CONTROLSUITE

I have just started working on the piccolo USB stick TMS320F28069 and i intend to interface it with a stepper motor, I have 3 versions of cc studio with me , version 4, 5 and 6. Could anyone help me with how do I go about with the connections and how do i do the programming part of it.

  • 0
    Guru 192875 points

    Hi Gourav,

    Could anyone help me with how do I go about with the connections and how do i do the programming part of it.

    Install the latest CCS v6 and controlSuite. You can refer the mcu datasheet for hardware connections. As for programming and debugging the control stick has an on-board emulator which will take care and this can be done using CCS v6.

    Regards,

    Gautam