• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 398 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

320F28335 Flash Production Programming

Bruce Louie
Intellectual 455 points
Other Parts Discussed in Thread: UNIFLASH

Hello,

I have read through many different posts regarding flashing production code to the 28335. But most seem to be outdated, and when I follow the embedded links they are for previous versions of CCS.

I am running CCS 5.3 and currently debug my 28335 with a  Spectrum Digital XDS100v2.

I would like to do a small batch (<50 units) of production programming with this as well, and from all the other posts I think I have settled on using the SDFlash tool for this.

Is there a resource you could point me towards that will detail the process of how to set this up and accomplish my production flash programming?

Thanks,

Bruce

  • 0
    TI__Guru 55700 points
    Bruce,

    Below documents should provide all the information you need

    http://processors.wiki.ti.com/index.php/Category:Flash_for_C2000
    http://www.ti.com/lit/an/spraal3/spraal3.pdf
    http://www.ti.com/lit/an/spraaw0/spraaw0.pdf

    You could also think about using UniFlash (http://processors.wiki.ti.com/index.php/Category:CCS_UniFlash)

    Regards,
    Manoj
  • 0
    Guru 192875 points
    Hi Bruce,

    Apart from comments from Manoj, I would like you to check C2PROG that can be found here: www.codeskin.com/programmer
    My people in production use the same :)

    Regards,
    Gautam