Field oriented control on F28069

Anagha Paradkar32

Other Parts Discussed in Thread: CONTROLSUITE

I want to perform FOC on F28069 for sensorless AC induction motor. An example code for FOC on F2803x is available in controlsuite but I am facing some problem for converting it to be compatible with F28069. Could anyone tell what all modification is necessary in the sample code?

over 11 years ago

0 Gautam Iyer over 11 years ago

Guru 192875 points

Hi Anagha,

Could anyone tell what all modification is necessary in the sample code?

Which project are you referring?

Regards,
Gautam

0 Maria Todorova over 11 years ago

Guru 13185 points

Hello,

It shouldn't be that difficult to migrate from F2803x of this project (HVAC Sensorless from ControlSuite) to F28069. They are similar.

Most of them related to cmd files and header files that need to be changed into F28069 files, also some few initializations (for example for the clocking speed).

Please refer to this document http://www.ti.com/lit/an/sprabj2/sprabj2.pdf

Best regards,

Maria

0 Anagha Paradkar32 over 11 years ago in reply to Gautam Iyer

Prodigy 60 points

Hi Gautam,

I am currently using the example code given in development kits under #controlSuite. The name of the project is HVACI_Sensorless.

0 Gautam Iyer over 11 years ago in reply to Anagha Paradkar32

Guru 192875 points

Anagha,

In addition to Maria's suggestions, you'll need to link the customized source & header files (esp. developed for this project) to your project other than device source & header files. Let us know if you face any difficulty in doing so.

Regards,
Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

Field oriented control on F28069