Control suite c2000

Ravisankar

Other Parts Discussed in Thread: TMS320F28335, CONTROLSUITE

Hi all,

I am very new to TI DSPs. I have installed CCS latest(6.0v) and older versions(3.3v and 5v) version to start with "hello world".My DSP is F28335.I could not find any library files coming with the installation for C2000. I searched for Control suite for C2K series and SPRC530. SPRC530 is not available and I got the download link form the support team. However the link does not work. The project is very urgent and still I could not start with CCS for the TMS320F28335 DSP. I request the expert users to help me with some guidance to start with CCS6.0 and TMS320F28335.If there is any link to download control suite apart from TI, would be helpful, since the review to download software from TI is really tedious and takes almost a week to get the new link.

Thanking you.

over 11 years ago

0 Gautam Iyer over 11 years ago

Guru 192875 points

Hi Ravisankar,

Alternately you can get sample codes for the device from here:

www.ti.com/mcu/docs/mcuprodcodeexamples.tsp?sectionId=96&tabId=1470

Regards,

Gautam

0 Ravisankar over 11 years ago in reply to Gautam Iyer

Prodigy 110 points

Hi Gautam,

Thanks for your reply.Earlier I have gone through the link. However for the TMS32028335 "F2833x (Delfino) / F2823x C/C++ Header Files and Peripheral Examples" link is not available (http://focus.ti.com/docs/toolsw/folders/print/sprc530.html ). SPRC530 is missing.Remaining all are available. Is it really necessary to add these header files for successful compilation?

0 Gautam Iyer over 11 years ago in reply to Ravisankar

Guru 192875 points

Here's the header files and yes they're very much necessary.Header.zip

0 Ravisankar over 11 years ago in reply to Gautam Iyer

Prodigy 110 points

Hi Gautam,

Thanks for the solution.

0 Gautam Iyer over 11 years ago in reply to Ravisankar

Guru 192875 points

You're Welcome!

Goodluck & Regards,
Gautam

0 Ravisankar over 11 years ago in reply to Ravisankar

Prodigy 110 points

Hi Gautam,
Yes it's getting compiled. I have a dohttp://e2e.ti.com/support/microcontrollers/c2000/f/171/p/390853/1379995#ubt, what about control suite? Is it still required to do the 'real stuff' on CCS with F28335. Can start developing with the DSP with the header files in the link you have provided? Thanks in advance.

0 Ravisankar over 11 years ago in reply to Ravisankar

Prodigy 110 points

Hi Gautam,
Yes it's getting compiled. I have a doubt, what about control suite? Is it still required to do the 'real stuff' on CCS v6.0/5.3 with F28335. Can I start developing with the DSP with the header files in the link you have provided? My requirement is to generate dual PWM signals. Thanks in advance.

0 Gautam Iyer over 11 years ago in reply to Ravisankar

Guru 192875 points

Can I start developing with the DSP with the header files in the link you have provided?

Yes, off course. Just that special math, digital power, motor libraries etc won't be present here. For which you need to download controlSuite. Keep trying regularly for the link, I really don't know why such a long delay to send the link!

My requirement is to generate dual PWM signals.

The above header files are enough for generating PWM signals.

Regards,
Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

Control suite c2000