• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 81 subscribers
  • Views 416 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

While Debuging ready made programm of control suit for TMS320F28027 Launchpad

Ashutosh Pailwan1
Expert 2480 points
Other Parts Discussed in Thread: CONTROLSUITE

I am getting following error while debbuging the control suit example

Please guide earlier it was working fine now it is showing problem 

**** Build of configuration Debug for project GPIOtoggle_2 ****

"c:\\ti\\ccsv6\\utils\\bin\\gmake" -k all
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_CodeStartBranch.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_CpuTimers.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_DefaultIsr.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_GlobalVariableDefs.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_Gpio.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_PieCtrl.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_PieVect.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_SysCtrl.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [DSP2802x_usDelay.obj] Error 5
process_begin: CreateProcess(C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, C:\Users\Owner\AppData\Local\Temp\make5312-1.bat, ...) failed.
make (e=5): Access is denied.

gmake: *** [Example_2802xGpioToggle.obj] Error 5
gmake: Target `all' not remade because of errors.

**** Build Finished ****