C2000 Software Frequency Response Analyzer

Mohamed Kandil

Other Parts Discussed in Thread: SFRA, CONTROLSUITE

Hello ,

I have eZdsp F2812 board and xds100v3 as emulator. I use CCS 5.5 and Embedded Coder toolbox in MATLAB 2013b. I come across the new tool C2000 Software Frequency Response Analyzer (SFRA) but I don’t know how to modify the generated code to add this tool to the code.

Could you please guide me how to use the tool SFRA with my setup?

Best Regards,

Mohamed

over 10 years ago

0 Gautam Iyer over 10 years ago

Guru 192875 points

Hi,

Let me link you to Manish Bhardwaj.

Regards,

Gautam

0 Manish Bhardwaj over 10 years ago in reply to Gautam Iyer

TI__Mastermind 43730 points

Mohamed,

Do you have controlSUITE installed?

SFRA is available with controlSUITE, you will need to download it and then browse to

C\ti\controlSUITE\libs\app_libs\SFRA\v1_00_00_00\Doc

The UG has section called section 3.4 , how to add SFRA lib to a project,

You will need to follow those steps to add it to your project,

regards

Manish

0 Manish Bhardwaj over 10 years ago in reply to Manish Bhardwaj

TI__Mastermind 43730 points

Plus if you like to see a video it's on youtube

www.youtube.com/watch

0 Mohamed Kandil over 10 years ago in reply to Manish Bhardwaj

Prodigy 35 points

Manish,

Thank you so much for your reply. Yes I've installed controlSUITE but I don't know if it supports my board or not. Is my board (eZdsp F2812 + xds100v3) supported by SFRA tool?

0 Mohamed Kandil over 10 years ago in reply to Manish Bhardwaj

Prodigy 35 points

Thank you Manish for the video but the quality is very low. Do you have a higher quality of this video?

C2000™︎ microcontrollers

C2000 microcontrollers forum

C2000 Software Frequency Response Analyzer