opening LAUNCHXL-F28069M demo project...

user4267172

Other Parts Discussed in Thread: LAUNCHXL-F28069M, CONTROLSUITE

I opened the box of 'LAUNCHXL-F28069M' launchpad development kit and connected the USB cable.

I have fixed the COM port recognition problem with setting VCP driver at TI XDS Channel B and re-connecting the USB connector.

And, with putty program, I have checked the 'LAUNCHXL-F28069M' board is working well (temperature sensing...).

With CCS v6.1.0.00104, I have tried to open the example demo project file(c:\ti\controlSUITE\development_kits\LAUNCHXL-F28069MLaunchPadDemo)

But, this message appeared... "See details below...
Unrecognized product of type 'com.ti.rtsc.XDAIS' is required by project 'Example_2806xLaunchPad' - please install at least one product of this type before building this project."

What is type of 'com.ti.rtsc.XDAIS' and what is the solution for this error?

Is there anybody who have the same experience? ^^

over 10 years ago

0 Maria Todorova over 10 years ago

Guru 13185 points

Hello,
I don't have this problem on CCS v6.0.1.
When I have time, I will install CCS 6.1 and try this. I will let you know.
Just wondering, is there any xdais folder in your ti folder? Like this C:\ti\xdais_7_24_00_04 for example
It should be, but if not, maybe you can download and install it in your PC.
software-dl.ti.com/.../index.html
Maybe this will help.

Best regards,
Maria

0 user4267172 over 10 years ago in reply to Maria Todorova

Intellectual 260 points

Oh! it really works~ thank you so much... (I have made the 'xdais_7_24_00_04' folder)
^^

0 user4267172 over 10 years ago in reply to Maria Todorova

Intellectual 260 points

Do you know if there is any pdf documents of CCS 6.x userguide ? I couldn't find out one...

0 Gautam Iyer over 10 years ago in reply to user4267172

Guru 192875 points

Hi,

Are you looking for any specific topic that you would want to study in CCS v6?

Regards,
Gautam

0 user4267172 over 10 years ago in reply to Gautam Iyer

Intellectual 260 points

For now, I am studying 320f28069m for the first time and CCS v6 also does.(some experience of KEIL software for other manufacture's MCU)

I prefer PDF documents rather than videos if I can get.
For example, how I set the target devices, how I include the needed drivers.... the user guide of CCS is essential.

I intend to develop 3phase AC motor drive with 320f28069m (just opened the box of LAUNCHXL-F28069M...^^)

0 Gautam Iyer over 10 years ago in reply to user4267172

Guru 192875 points

Install controlSuite. This includes all that you need. You simply have to import the sample projects from controlSuite and study the project structure. For eg. the sample codes and peripheral drivers are enlisted here:
C:\ti\controlSUITE\device_support\f2806x\v141\F2806x_examples_ccsv5

Regards,
Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

opening LAUNCHXL-F28069M demo project...